description
이 장비는 완전 자동 roll to roll 방식 장비로서 membrane 또는 다른 재질의 roll material을 시약에 처리하고 건조 후 (좁은 폭으로 절단하고 : 옵션 사양) 되감는 장비이며 넓은 폭의 roll material 을 한번에 처리하므로 대량 생산의 목적에 적합합니다.
- 시약 처리 부
- 1) 히터가 내장되어 있어 시약의 온도를 자동으로 조절 (옵션 사양).
- 2) 시약의 양을 타이머 또는 센서를 이용하여 자동으로 조절.
- 3) 처리 후 감는 공정에서 텐션을 자동 조절하여 일정하게 감기도록 함.
- 건조로
- 1) 온도 조절 가능 (max. 120℃).
- 2) 건조 효율을 위해 옆에서 옆으로 건조 에어 공급.
- 3) 각 건조로는 개별적으로 온도 조절 가능.
- 4) 청소와 교체가 쉽도록 설계.
- WINDING FIXTURES
- 1) 내장 edge position controller가 일정한 위치에 자동으로 감기도록 함.
- 2) Air shaft 방식으로 쉽게 roll material을 탈 부착 가능.
- 3) 설정 작업량 완료 시 알람.
- SPLITTER SYSTEM
- 1) Air shaft 방식으로 쉽게 roll material을 탈 부착 가능.
- 2) Blade Type : Rotary Ring Knife
- · 재질 : Hardened steel
- · Rockwell 경도 : HRC59~60
- · 코팅 : 티타늄 코팅
- · 모터 : Servo Motor (1/2Hp) – 스피드 조절 가능
- 3) 파워 클러치에 의해 텐션 조절.
- 4) Splitting 후 못쓰는 자재 부분은 따로 처리.
MODELVODPRODUCTION SCALEASSAY TYPEMATERIAL APPLICATION MORE INFO
-
OASI-300HIGHIMMUNOConjugate & Sample Padmore info
PRODUCT SPECIFICATIONS
- NA (Please contact us for details)
-
OAU-300HIGHURINEMembranemore info
PRODUCT SPECIFICATIONS
- - Applicable Membrane Roll Size
- : Width: Max. 300 mm, Length: 100 m (As required) *Please contact us for other material specifications
- - Length of membrane in the chamber
- : Approximately 14 m
- - Dip Tank Pump Type
- : Tubing pump
- - Dip Tank Roller and Tank
- : Replacement type, Stainless steel tank & rollers
- - Dip Tank
- : Water bath at constant 100℃ maximum
- - Dry Oven Type
- : Hot wind circulation type
- - Dry Oven
- : Separate temperature control for each of 3 zones (Chamber’s temperature 40~80℃, controlled at max. 100℃), Humidity at 10% or less.
- - Roller Frame (shelf)
- : Stainless steel
- - Feeding Speed
- : 4 ~ 100 mm/sec
- - Winding
- : Edge Position Control
- - Dimensions
- : (Approx.) 8000(L) x 2000(W) x 1900(H) mm
- - Weight
- : (Approx.) 1200 kg
- - Compressed Air
- : 4~5 kgf/㎠ (700 liter/minute)
- - Power
- : 380 Volt, 50/60 Hz, 3P
- - Current
- : 51kw, 90 A
*90A is reached when all 3 zones in the chamber are turned on at the same time. The current can be reduced to 45A by turning on each of the 3 zones one at a time.